Avery Dennison Monarch 9416 XL Ethernet - Manual

E T H E R N E T S E T U P G U I D E
Your Monarch® 9416® XL® Thermal Transfer printer has
a factory-installed internal Ethernet print server. Use this
Setup Guide to connect the printer to your network with
the Print Server Utility (provided on the enclosed
CD-ROM).
Information in this document supercedes information in
previous versions. Check our Web site
(
www.monarch.com ) for the latest documentation and
release information.
C o n n e c t i n g t h e P r i n t e r
1. Turn off the printer.
2. Connect a network cable from the printer to your
network using the Ethernet port.
Ethernet Port
3. Turn on the printer.
Note: When using the internal Ethernet printer server,
the printer’s parallel port is disabled.
TC9416TTIESG Rev. AC 2/09 ©2007 Avery Dennison Corp. All Rights Reserved.