Avery Dennison Sierra Sport4 9493 Vehicle Mount - Manual

TC9493VMOI Rev AG 12/10
2009 Avery Dennison Corp. All Rights Reserved.
M O N A R C H

9 4 9 3 ™
V E H I C L E M O U N T
I N S T R U C T I O N S
Using the vehicle mount, you can attach your
Monarch
 Sierra Sport4™ 9493 printer to a
forklift or other vehicle. This document describes
how to install and use the vehicle mount with the
printer.
Information in this document supercedes
information in previous versions. Refer to our Web
site (
www.monarch.com ) for the latest
documentation and release information.
I n s t a l l i n g t h e B a t t e r y
The printer has a battery for power; however, it
uses the vehicle’s battery to keep the printer’s
battery charged. The input voltage range is
13-48V.
Refer to the printer’s Operator’s Handbook for
important battery information.
1. Turn off the printer when you change batteries.
2. Lay the printer down so the back of the printer
faces up.
3. Remove the plastic from a new battery. Slide
the battery into the battery well in the bottom
of the printer until it latches into place.