Avery Dennison SNAP 700 - Manual (Page 4)

User’s Manual—SNAP™ 700 Printer
3.1.4 Butt Splice 28
3.1.5 Threading Diagrams 29
3.2 Sending a Print Job to the Printer 30
3.3 Printing Labels 30
3.3.1 The Control Panel 30
3.3.2 Printing 31
3.3.3 Handling the Leader 31
3.3.4 Feeding the stock 31
3.3.5 Errors 32
3.3.6 End of Day 32
3.3.7 Clearing Print Jobs 32
3.4 Using Pre-Printed Stock 33
3.4.1 Selecting the Sensor 34
3.4.2 Aligning the Stock to the Sensor 34
3.4.3 Aligning the Sensor to the Stock 34
3.5 Option Menu System 35
3.5.1 Running Test Patterns 36
3.5.2 Setting / Adjusting Voice Button Volume 38
4.0 MAKING ADJUSTMENTS 40
4.1 Print Head Adjustments 40
4.1.1 Adjusting Print Head Pressure 40
4.1.2 Adjusting Density (Darkness) 41
4.2 Adjusting the Stacker 41
4.2.1 Stacker Position 42
4.2.2 Toggle Switch 42
4.2.3 Stacker Angle 42
4.2.4 Platform 43
4.3 Virtual Control Panel 44
4.3.1 Introduction 44
4.3.2 Changing Printer Settings in PCMate (Printer Settings) 45
4.3.3 Print/Cut Adjust (VCP Print/Cut Adjust Tab) 45
4.3.4 Selecting the Printer Language (VCP Options Tab) 46
4.3.5 Setting the Date and Time (VCP Options Tab) 47
4.3.6 Enabling or Disabling the Cutter (VCP Options Tab) 47
4.3.7 Selecting the Print Speed (VCP Options Tab) 47
4.3.8 Selecting the Flagging Mode (VCP Options Tab) 48
4.3.9 Selecting the Sense Mark Type (VCP Options Tab) 48
4.3.10 Setting the Default Transfer Type (VCP Options Tab) 48
4.3.11 Viewing the Life Counts (VCP Versions/History Tab) 49
4.3.12 Firmware Version (VCP Versions/History Tab) 49
4.3.13 Print Quality (VCP Arbor Tension Adjust Tab) 50
4.3.14 Other information on VCP 50