ARRIS 2247-N8-10NA (v9.1.x) User Manual - Manual (Page 95)

Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Please visit www.motorola.com/us/support for FAQs and additional product documentation. 95
How to - assign the 2247-N8’s public IP address to a single LAN client:
Use this setting to pass the 2247-N8 public IP address through to a device on the home or wireless network.
Open the Firewall > IP Passthrough page.
1. Click the Allocation Mode pull-down menu and select the Passthrough allocation mode.
2. Choose the method that the 2247-N8 will use to assign the public IP address to the one passthrough client from the Passthrough Mode pull-
down menu (DHCPS-dynamic, DHCPS-fixed, or Manual).
3. Configure the selected passthrough mode:
™ DHCPS-dynamic: Assign the passthrough public IP address to the first client device to renew its DHCP lease, if the public IP address is available
(not granted by a held lease to another client device). No further configuration of the passthrough mode is required.
™ DHCPS-fixed: Choose the one device on the home or wireless network that the 2247-N8 public IP address will be assigned to:
Š If the device has already connected to the 2247-N8 networks, find and click the device address in the Choose from List field.
Š If the device has not connected to the 2247-N8 networks, you may type its MAC address in the Manual Entry input field.
™ Manual: Manually assign the public IP address and the service provider’s network mask and default gateway values to the client device on
the network. No further configuration of the passthrough mode is required on the 2247-N8.