ARRIS 2247-N8-10NA (v9.1.x) User Manual - Manual (Page 55)

Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Please visit www.motorola.com/us/support for FAQs and additional product documentation. 55
The fields of the IPv6 page update to show IP6in4 tunnel configuration settings.
3. Type your Point of Presence address for IPv6 tunneling in the POP IPv4 Address field.
4. Type the 2247-N8 local interface’s IPv6 address in the Local IPv6 Address field.
5. Set the IPv6 address prefix details:
a. Type your service provider’s IPV6 6rd prefix (this value will be unique to your service provider) in the 6rd Prefix input field.
b. Type the length of the 6rd prefix (available from your service provider) in the 6rd Prefix Length field.
6. If your home (local) network will also use IPv6 addressing, click the IPv6 Enable on LAN pull-down menu and click On. Use the fields below the
IPv6 Enable on LAN menu to set the connection type for your local network:
7. Click the LAN IPv6 Connection Type pull-down menu and select the addressing method defined by your IPv6 6rd connection:
a. If the local network will derive local IPv6 addresses from the broadband IPv6 DHCP server, select Delegated Prefix (the default).
b. If your IPv6 network uses static (assigned) addresses, select Static IP. Type the IPv6 address of your 2247-N8 LAN gateway interface in the LAN
IPv6 Address field.
Click the Save button to add the IPv6 Broadband configuration settings. .