ARRIS 2247-N8-10NA (v9.1.x) User Manual User Manual
Page 53

Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Please visit
www.motorola.com/us/support
for FAQs and additional product documentation.
53
How to -
configure an IPv6 DHCP Client setting for the 2247-N8
Open the
Broadband > IPv6
page.
1. Click the
IPv6 Enable
pull-down menu and select On to enable IPv6 service, or Off to disable it (the default).
2. Click the
WAN IPv6 Connection Type
pull-down menu and select IPv6 DHCP Client.
The fields of the IPv6 page update to show DHCP related configuration settings.
3. If your home (local) network will also use IPv6 addressing, click the
IPv6 Enable on LAN
pull-down menu and click On. Use the fields below the
IPv6 Enable on LAN
menu to set the connection type for your local network:
4. Click the
LAN IPv6 Connection Type
pull-down menu and select the addressing method defined by your IPv6 6rd connection:
a. If the local network will derive local IPv6 addresses from the broadband IPv6 DHCP server, select Delegated Prefix (the default).
b. If your IPv6 network uses static (assigned) addresses, select Static IP. Type the IPv6 address of your 2247-N8 LAN gateway interface in the
LAN
IPv6 Address
field.
5. Click the
Save
button to add the IPv6 Broadband configuration settings. .
How to -
set up AICCU IPv6 tunneling
Open the
Broadband > IPv6
page.
1. Click the
IPv6 Enable
pull-down menu and select On to enable IPv6 service, or Off to disable it (the default).
2. Click the
WAN IPv6 Connection Type
pull-down menu and select AICCU Tunnel.