ARRIS 2247-N8-10NA (v9.1.x) User Manual User Manual

Page 30

Motorola 2247-N8 DSL Wi-Fi Gateway User Guide

Please visit

www.motorola.com/us/support

for FAQs and additional product documentation.

Access Codes: When unrestricted LAN access is Off, the 2247-N8 requires an access code. The default access code is the Device Access Code
that is printed on a label attached to the outside (bottom) of the 2247-N8 at the factory.

Note:

If you use password protection, your user name is “admin”.

How to -

set or change the 2247-N8 device access code:

Start at the

System > Access Code

page.

Use the Access Code fields as follows;

Type the current or default access code in the Enter Old Access Code input field.

Type a new access code (password) in the Enter New Access Code field, then type it again in the Retype New Access Code field. Choose
a code that is easy for you to remember but difficult for someone else to guess.

Click the

Use New Access Code

button to save the new setting to the 2247-N8.

If you want to return to the default access code, click the

Use Default Access Code

button at the bottom of the page.