ARRIS 2247-N8-10NA (v9.1.x) User Manual User Manual

Page 67

Motorola 2247-N8 DSL Wi-Fi Gateway User Guide

Please visit

www.motorola.com/us/support

for FAQs and additional product documentation.

5. Specify the type of IP addresses that the 2247-N8 will first use to assign addresses to DHCP client devices: Click the Private selection button to

assign IP addresses in the private IP address space before assigning IP addresses in the public IP address space, or the Public selection button to
use public IP addresses first.

6. Click the

Save

button to assign the DHCP configuration to the 2247-N8.

How to -

set the 2247-N8 to work with a cascaded router on the home network:

Open the

Home Network > Subnets & DHCP

page.

1. Click the

Cascaded Router Enable

pull-down menu and select On to enable the cascaded router functionality or Off (the default) to use only the

default private IP network. If you are setting the function to Off, Click the

Save

button to end the procedure.

2. Type the IP address of the router that is present on your home network in the

Cascaded Router Address

field.

3. Type the IP address and subnet mask of the IP subnet that the cascaded router supports in the

Public IPv4 Address

and

Public Subnet Mask

fields. These fields identify the IP addresses that are reserved for the use of the cascaded router and its client devices.

4. Click the

Save

button to assign the cascaded router configuration to the 2247-N8.