Dataman 520 Series - Manual (Page 93)

DATAMAN oscilloscope
User’s Guide
HoldOffSamples (Integer) – code 13
Hold-off length in samples.
ProbeMode (IntArray) – code 14
The probe attenuation (0 – 1:1, 1 – 1:10, 2 – 1:100, 3 – 1:1000). Array length
corresponds with the channel count.
Ground (BoolArray) – code 15
Indicates whether the grounding is on. Array length corresponds with the channel
count.
DC (BoolArray) – code 16
Indicates whether the DC coupling is on. Array length corresponds with the channel
count.
GroundPos (DoubleArray) – code 17
Position of the 0V on the screen (in quantization levels – from 0 to 255). Array length
corresponds with the channel count.
AcquiredData (AcqData) – code 18
The data measured on the channels (together with virtual channels).
Version (Integer) – code 19
File version (currently set to zero).
FirstValidSamples (IntArray) – code 20
Index of the first valid sample in the channel data.
LastValidSamples (IntArray) – code 21
Index of the last valid sample in the channel data.
TriggerSrcOnSecondary (BoolArray) – code 22
Indicates triggering on the secondary level from source (index 0 – channel A, 1 –
channel B, 2 – external trigger input).
TriggerSrcLeadingSecondary (BoolArray) – code 23
Indicates whether the triggering from the source is sensitive on the leading edge
(index 0 – channel A, 1 – channel B, 2 – external trigger input).
ATMode (Integer) – code 24
After trigger count mode (0 – HSC, 1 – FSC, 2 – Set, 3 – Min).
HFMode (Integer) – code 25
Hold-off mode (0 – Auto, 1 – Set).
SimpleTrigger (Bool) – code 26
Indicates „Simple“ mode of the trigger system.
WCDSensitivity (Integer) – code 27
- 93 -