Dataman 520 Series User Manual
Page 54
DATAMAN oscilloscope
User’s Guide
Display | Grid | Allow vertical shift change by dragging ground position – the vertical
shift can be changed by dragging the ground line
Display | Grid | Allow vertical shift change by dragging grid – if turned on, it is
possible to drag the grid (horizontal lines) to set the vertical shift. This option is
available only with the Dynamic vertical grid option on.
Display | Grid | Allow display start change by dragging grid – if turned on, it is
possible to drag the grid (vertical lines) to set the display start.
Display | Grid | Dynamic vertical grid position (ground on the line) – if turned on, the
grid position is automatically adjusted to keep ground of the channel A (or channel B
if channel A is turned off) on the horizontal line
Display | Grid | Dynamic horizontal grid position (trigger event on line) – if turned
on, the horizontal grid position will be adjusted to match the trigger event (one of the
vertical lines will match the trigger event).
Display | Grid | Display legend – turns the grid legend on/off
Display | Grid | Precise legend values – if turned off, the legend values will be
rounded to achieve best readability, otherwise they are rounded to three decimals
Display | Quickview | Display quickview – if more than 64k samples are acquired,
quickview is displayed above the oscilloscope screen
Keyboard | General | Keyboard control – enables/disables mode, which allows you to
control some functions using the keyboard. Please see chapter 4.14.4. for the list of
supported functions.
Keyboard | General | Distinguish between left and right shift/ctrl – if this options is
enabled the left and right ctrl (or shift) are considered as different keys. If the
keyboard control is disabled this setting has no influence on the application.
Keyboard | Hotkeys | Configure hotkeys – opens the window where you can configure
hotkeys (see chapter 4.14.4.).
Printing | Printing | Print in black and white – enables/disables black and white
printing
Printing | Printing | Use application color scheme – activates/deactivates printing in
the application color scheme (the screen and channels will be printed in the
application colors)
Rendering | Waveform rendering | Enhanced xor draw – activates/deactivates
enhanced xor waveform drawing. The standard draw method produces dots instead of
peaks, because the lines, which create waveform, xors themselves out. Enhanced
drawing solves this problem, but requires more processor time.
- 54 -