Dataman 520 Series - Manual (Page 79)

DATAMAN oscilloscope
User’s Guide
„High pulse level“, „Low pulse level“, „High overshoot“, „Low overshoot“, „Rise
time“, „Fall time“.
Time between 10% and 90% of the voltage between the low and high pulse is
considered to be the length of the edge.
Click the cross on the left side of the parameter name to hide it.
It is possible to display the following statistics for each parameter:
„now“ – current value of the parameter
„min“ – minimal value of the parameter
„max“ – maximal value of the parameter
„avg“ – average value of the parameter
„dev“ – parameter deviation
WARNING: The statistics are calculated from the whole history of the
waveform. Click the item in the main menu to reset them.
6.11.1. – Main menu
The main menu is located at the top of the window. The following items are available:
Edit | Copy – Copies table to clipboard in text format.
Edit | Reset params – Resets statistics of all parameters.
Settings | Channel C range source – Channel C parameters will be calculated using
the range of selected channel.
Settings | Channel D range source – Channel D parameters will be calculated using
the range of selected channel
Settings | Stay on top – Activates/deactivates mode always on top mode of the
window.
Row | Show – Shows/hides selected parameter
Row | Show only – Shows selected parameters and hides others.
Row | Show all – Shows all parameters
Row | Configure rows – Opens the window, where it is possible to show/hide the
parameters.
Column | Channel – Activates/deactivates selected channel parameters
Column | Show – Shows/hides selected statistic
Column | Show only – Shows selected statistic and hides others.
- 79 -