Dataman 520 Series - Manual (Page 33)

DATAMAN oscilloscope
User’s Guide
Fig. 4.1.3.1. – The cursors and grid controls
- activates/deactivates vertical cursors.
- activates/deactivates horizontal cursors.
„Grid“ - activates/deactivates grid.
„Trc“ - activates/deactivates the Trace mode, where the cursors behave as follows:
- the cursor 2 behaviour is not affected
- while dragging cursor 1, the cursor 2 moves to maintain the distance between
cursors
„X“ – activates/deactivates the mode, where the dragging of the cursors intersection
moves both cursors
„Clear“ – clears all acquired waveforms on the screen
The top scrollbar (Grid) adjusts grid brightness. The bottom scrollbar (Wnd)
adjusts window transparency.
TIP: The grid color can be changed in the main menu.
WARNING: The window transparency consumes system resources when turned
on. Drag the scrollbar to the right to turn the window transparency off.
WARNING: The window transparency is supported by Windows 2000, XP,
Vista and 7. In the case where the software runs under different operating
systems the scrollbar is disabled.
4.1.4. Channel display controls
The channel controls are located in the left of the main window.
Fig. 4.1.4.1. – Channel display controls
„A“ – activates/deactivates channel A waveform
„B“ – activates/deactivates channel B waveform
- 33 -