Manage exports as ascii window, Fig. 4.3.2.1. – manage exports as ascii window – Dataman 520 Series User Manual
Page 55
DATAMAN oscilloscope
User’s Guide
Automatic actions | Triggering | Set auto trigger mode, when the input is grounded –
if turned on, the software automatically sets “auto” trigger mode, when at least one
input is grounded
Automatic actions | Triggering | Move trigger level together with vertical shift – if
turned on, the software automatically sets trigger level to maintain its level in volts,
when the vertical shift changes
Automatic actions | Triggering | Move trigger level together with range – if turned on,
the software automatically sets trigger level to maintain its level in volts, when the
range changes
Automatic actions | Autosave | Deactivate autosave on startup – if turned on, the
autosave is always turned off on the application startup. This option defaults to on
because of the safety issues (to prevent running out of hard drive space).
Controls | Vertical | Display screen position in vertical position sliders – if turned on,
the main screen position is displayed in the vertical shift sliders
Controls | Vertical | Calculate range with regard to probe attenuation – if turned on,
the probe attenuation information is included in the range information in vertical
panel
Controls | Vertical | Enable external attenuation controls – if turned on, the controls
which allow you to select the external attenuation ratio (other than probe), are
displayed in the main screen
4.3.2. Manage exports as ASCII window
Click the item in the main menu to open „Manage exports“ window.
Fig. 4.3.2.1. – Manage exports as ASCII window
- 55 -