Dataman 520 Series - Manual (Page 34)

DATAMAN oscilloscope
User’s Guide
The special function can be activated by clicking on the appropriate button (located in
special functions box) followed by clicking on one of the buttons located in the
bottom of the channel controls. Function results are displayed with the color of the
selected virtual channel (left button is channel C, right one is channel D).
4.1.5. Save/load controls
The save/load controls are located in the bottom of the main window.
Fig. 4.1.5.1. – Save/load controls
The load controls are located in the panel top.
Fig. 4.1.5.2. – Load controls
The name of source file has to be inserted into the upper edit box. Click to browse
for the file.
Click the “Load” button to load and display data. The indicator by the edit box turns
green on successful load.
TIP: If the filename ends with the number, this number can be automatically
incremented on a successful load (this feature can be turned on/off through the
main menu).
Click the “Unload” button to stop displaying the loaded data.
Click the “Apply settings” to set the settings loaded from the data file.
TIP: The settings can be applied automatically (this feature can be turned on/off
through the main menu).
The indicator by the „Apply settings“ button changes color depending on the actual
settings:
Green – the actual settings and settings from the data file are same
Yellow – the actual settings differ from the settings from the data file in some
parameters, but the range and timebase settings are the same
- 34 -