Channel b voltage inversion (-vb), X-y function (x/y), Fig. 6.8.1. – x-y function window – Dataman 520 Series User Manual
Page 70
DATAMAN oscilloscope
User’s Guide
6.7. Channel B voltage inversion (-VB)
Function calculates the channel B inversion, where the reference cursor position is
considered as a zero value (reference cursor on) or the 0V is considered as a zero
value (reference cursor off).
6.8. X-Y function (X/Y)
The X-Y function window is opened after activation of the X-Y function.
Fig. 6.8.1. – X-Y function window
TIP: The X-Y function window always stays on top. Therefore it is possible to
change the oscilloscope settings and see their influence immediately.
The 0V values for X-axis and Y-axis are displayed in gray.
TIP: The 0V positions can be changed by vertical shift for both axis.
Two horizontal and two vertical cursors are available. Drag them to change their
position.
TIP: The X-Y function displays the data visible on the main screen. The zoom
function affects the amount of displayed data.
The cursors’ position information is displayed in the lower right corner of the
window:
- voltage between red vertical cursor and 0V
- voltage between vertical cursors
- voltage between red horizontal cursor and 0V
- voltage between horizontal cursors
- 70 -