Dataman 520 Series - Manual (Page 51)

DATAMAN oscilloscope
User’s Guide
4.3. Main menu
The main menu is located at the top of the main window. The following menu items
are available:
File | Print – Opens print manager.
File | Exit – Closes application.
View | Simple mode – Activates simple mode of the main window.
View | Classic mode – Activates classic mode of the main window.
Edit | Export as ASCII | Manage exports – Opens the window, where the
export definitions can be configured. Click item in the File | Export as ASCII to
export data using specified definition.
Edit | Export as image | Manage exports – Opens the window, where the
export definitions can be configured. Click item in the File | Export as image to
export data using specified definition.
Settings | Save settings – Saves current settings into the selected file
Settings | Load settings – Loads settings from the selected file
Settings | Reset to factory defaults – Restores factory default
Settings | Process licence file – Loads and processes the specified licence file
Settings | External trigger output | Compensation generator –
Activates/deactivates compensation generator.
Settings | WCD sensitivity | Very high – Sets very high WCD sensitivity.
Settings | WCD sensitivity | High – Sets high WCD sensitivity
Settings | WCD sensitivity | Medium – Sets medium WCD sensitivity
Settings | WCD sensitivity | Low – Sets low WCD sensitivity
Settings | WCD sensitivity | Off – Turns the WCD off
Settings | Digital shielding level – Opens window, where you can select the
digital shielding level.
Settings | Options – Opens the window where the software options can be
changed
Tools | Mask test | Create mask – Opens the window where you can select the
mask parameters
Tools | Mask test | Load mask – Loads the mask from selected file
Tools | Vertical shift calibration | Calibrate vertical shift – Opens the wizard
which will guide you through the calibration process
Tools | Vertical shift calibration | Calibration data | Use calibration data – In
case the additional calibration data is loaded, this item is checked. Click it to turn
using this data off. Turning them off is not permanent – once the application is
restarted the data will be loaded.
Tools | Vertical shift calibration | Calibration data | Delete calibration data –
Click this item to delete calibration data saved on the disk. The calibration data in the
device remains intact.
Help | Help – Displays the Help index
Help | View readme – Opens the readme.txt file, which contains information
about implemented changes in the application
Help | About – Displays information about the product.
4.3.1. Options
Click the item in the main menu to open the options window.
- 51 -