Altera Stratix V Avalon-ST - Manual (Page 247)

Location altpcietb_bfm_driver_rp.v
Syntax
ebfm_cfgwr_imm_nowt(bus_num, dev_num, fnc_num, imm_regb_adr, regb_len, imm_
data)
Arguments
bus_num PCI Express bus number of the target device.
dev_num PCI Express device number of the target device.
fnc_num Function number in the target device to be accessed.
regb_ad Byte-specific address of the register to be written.
regb_ln Length, in bytes, of the data written. Maximum length is four
bytes, The
regb_ln
the
regb_ad
arguments cannot cross a
DWORD boundary.
imm_data Data to be written
This argument is
reg [31:0]
.
In both languages, the bits written depend on the length. The
following encodes are defined.
• 4: [31:0]
• 3: [23:0]
• 2: [15:0]
• 1: [7:0]
ebfm_cfgrd_wait Procedure
The
ebfm_cfgrd_wait
procedure reads up to four bytes of data from the specified configuration register
and stores the data in BFM shared memory. This procedure waits until the read completion has been
returned.
Location altpcietb_bfm_driver_rp.v
Syntax
ebfm_cfgrd_wait(bus_num, dev_num, fnc_num, regb_ad, regb_ln, lcladdr,
compl_status)
17-36 ebfm_cfgrd_wait Procedure
UG-01097_avst
2014.12.15
Altera Corporation Testbench and Design Example
Send Feedback