Labconco PURICARE Procedure Station Models 31260 User Manual
Page 44

Product Service 1-800-522-7658
44
The Logic+ has three circuit boards. The ECM microprocessor and power
supply board, located in the end of the ECM, the control board on the right
side wall, shown in Figure 2-5, and the power supply board assembly,
located in the electronics module, as shown in Figure 1-13.
Figure 1-13
UV Relay
Light Relay
Outlet Relay
The Logic+ also has an optional contact/RS232 board. This must be installed
if the user wants to signal external building monitors or controllers, or wants
the Logic+ to output operating information to a data logger. The optional
board is located in the electronics module, shown in Figure 1-14.
Figure 1-14
RS-232 Board
This manual is related to the following products:
- PURICARE Procedure Station Models 31240 PURICARE Procedure Station Models 31162 PURICARE Procedure Station Models 31142 Type B2 Biosafety Cabinet Models 32368 Type B2 Biosafety Cabinet Models 32348 Type B2 Biosafety Cabinet Models 30368 Type B2 Biosafety Cabinet Models 30348 Type A2 Biosafety Cabinet Models 34269 Type A2 Biosafety Cabinet Models 34259 Type A2 Biosafety Cabinet Models 34249 Type A2 Biosafety Cabinet Models 34239 Type A2 Biosafety Cabinet Models 33269 Type A2 Biosafety Cabinet Models 33259 Type A2 Biosafety Cabinet Models 33249 Type A2 Biosafety Cabinet Models 33239 Type A2 Biosafety Cabinet Models 32269 Type A2 Biosafety Cabinet Models 32259 Type A2 Biosafety Cabinet Models 32249 Type A2 Biosafety Cabinet Models 32239 Type A2 Biosafety Cabinet Models 30268 Type A2 Biosafety Cabinet Models 30258 Type A2 Biosafety Cabinet Models 30248 Type A2 Biosafety Cabinet Models 30238 Type A2 Biosafety Cabinet Models 30261 Type A2 Biosafety Cabinet Models 30251 Type A2 Biosafety Cabinet Models 30241 Type A2 Biosafety Cabinet Models 30231 Type A1 Biosafety Cabinet Models 30162 Type A1 Biosafety Cabinet Models 30152 Type A1 Biosafety Cabinet Models 30142 Type A1 Biosafety Cabinet Models 30132