Labconco PURICARE Procedure Station Models 31260 - Manual (Page 4)

Product Service 1-800-522-7658 4
Section Three – Installation 50
Unpacking the Biosafety Cabinet 51
Preparing the Biosafety Cabinet for operation 51
Moving and Lifting the Logic 52
Installing the Purifier on an Existing Work Surface 52
Installing the Purifier on a Labconco Base Stand 52
Telescoping Base Stands 52-53
Manual or Electric Lift Base Stands 53
SoLo Electric Hydraulic Lift Base Stands 53
Connecting the Biosafety Cabinet to Utility Service Lines 54
Optional Ventus Canopy Exhaust Connections 55
Optional Vacu-Pass Cord and Cable Portal 56
Drain Valve Installation (optional) 57
Section Four – Initial Operation of the Logic
System Reset Switch 58
Information Center 59
Alarm Screens 60
Operating the Sliding Sash 61
Starting the Biosafety Cabinet 61
The Logic+ Touchpad 62
Navigating the Logic+ Menu Screens 63
Navigating the MyLogic Screens
Setting the Clock 64
Configuring the Logic+ 65-66
Navigating the Settings Menu Screens
Display Options
Units of Measure 66
Startup Tone 67
Security Lock 67
RS-232 Output 67
UV Settings
UV Lamp Hour meter 68
Reset UV Lamp Hour Meter 68
Change UV Lamp Life 68
Timer Operation
Interval Timer Operation 69
Stopwatch Timer Operation 69
If An Airflow Alert Activates 69
Resetting the Airflow Alert System 69