Labconco PURICARE Procedure Station Models 31260 - Manual (Page 17)

Product Service 1-800-522-7658 17
Quickstart
How do I run a diagnostic on the Canopy Alarm?
1. Press the Menu button.
2. Press the ▼ button until the Services option is highlighted (it will
turn yellow).
3. Press OK/Mute to enter the Services menu screen.
4.
Press the ▼ button until the Diagnostic option is highlighted (it
will turn white).
5. Press OK/Mute to enter the Diagnostic submenu.
6.
Press the ▼ button until the Diagnostic Canopy Alarm option is
highlighted (it will turn white). Press OK/Mute .
7.
The display shows the status of the Canopy Inlet Valve. During
normal operation, it will be open, and during a canopy alarm, it
will be closed. NOTE: The canopy door function is OPPOSITE OF
THE MAGNETIC SWITCH FUNCTION! – WHEN THE INLET VALVE
IS OPEN, THE MAGNETIC SWITCH IS CLOSED.
MAIN MENU
1. MyLogic TM
2. Settings
3. Service
  or to choose,
OK to select, MENU to escape
or to choose,
OK to select, MENU to return
Current Settings
Restore Default
Calibration
Configuration
 Diagnostics
 
Service
Diagnostics
or to choose,
OK to select, MENU to escape
Canopy Alarm
Sash sensors
Keypad - Relays
Airflow Sensor
 