East Coast Supercharging Lysholm 2010+ Camaro Supercharger Kit User Manual

Page 64

P/N: 4LGE020-010 v1.1, 2011-04-29

H. Assemble a supplied idler pulley as shown:

Insert M10x1.50x90mm screw with washer

through the idler dust shield, through the sup-

plied idler, and then through the pilot spacer.

See fig 7P.

I. Install the supplied .75” thick spacer between

the two mounting brackets in line with the top

most hole. Insert the previously assembled

idler and M10 screw through the brackets

and spacer and then tighten into the installed

PEM nut. See fig 7Q.

J. Tighten all the screws mounted on the idler

bracket. See fig 7R.

Fig 7Q

Fig 7R

Fig 7P

.75" SPACER