East Coast Supercharging Lysholm 2010+ Camaro Supercharger Kit User Manual

Page 51

P/N: 4LGE020-010 v1.1, 2011-04-29

Fig 5H

Fig 5I

K. Position relay on the passenger side upper

radiator core support, adjacent to the coolant

fill tube. Mark the position and drill a hole

using an 11/64” drill bit. See fig 5G.

L. Using #12 sheet metal screws, attach the

relay ground and mount the relay. See fig

5H.

M. Route and trim the yellow relay wire to the

#20 fuse (Engine power) on the power distri-

bution block. Using a fuse tap, connect the

wire to the fuse as shown. See fig 5I, 5J.

Fig 5G

DRILL 11/64"

NOTE: Use a multimeter to verify a positive ground con-

nection. If necessary remove the paint in the local-

ized area of the ground connection.