Windshield washer reservoir installation – East Coast Supercharging Lysholm 2010+ Camaro Supercharger Kit User Manual

Page 55

P/N: 4LGE020-010 v1.1, 2011-04-29

A. Locate the supplied washer fluid tank and

ensure that the straight 5/8” barb fitting is

installed as shown in Fig. 6A.

B. Install the previously-removed OEM washer

pump and grommet into the similar location

on the new reservoir. See fig. 6B.

C. Install the supplied bracket onto the reservoir

using the supplied ¼-20 bolts and washers

as shown in Fig. 6A.

D. Install the plain cap onto the reservoir and

tighten securely.

E. Place the reservoir assembly onto the driver

side frame rail with the bracket seating

squarely against the underside as shown in

Fig. 6D. Mark the position of the three (3)

mounting holes onto the underside of the

frame rail.

6. WINDSHIELD WASHER

RESERVOIR INSTALLATION

Fig 6B

Fig 6A