East Coast Supercharging Lysholm 2010+ Camaro Supercharger Kit User Manual

Page 25

P/N: 4LGE020-010 v1.1, 2011-04-29

AC. Remove the fuel tank cap. Relieve the fuel

system pressure at the fuel rail by carefully

depressing the schrader valve. Use a rag to

cover the valve to avoid fuel spray. See fig

1AN.

AD. Disconnect the eight (8) fuel injector wiring

clips from the injectors. See fig 1AO.

AE. Remove the fuel feed line assembly as fol-

lows:

1. Remove the safety clip from the 3/8 fuel

feed line located on the side of the pas-

senger strut tower below the ABS mod-

ule.

2 Disconnect the 3/8 fuel feed line and the

5/16 EVAP Quick disconnect fittings from

the feed lines on the side of the passen-

ger strut tower using the appropriate dis-

connect tools.

3. Remove the nut securing the fuel feed

line to the front passenger side fuel rail

stud.

4. Remove the safety clip and disconnect

the fuel feed line where it attaches to the

fuel rail assembly on the manifold using

the appropriate disconnect tool. Take

care to absorb any fuel spillage.

Fig 1AN

Fig 1AO

NOTE: Caution should be used when working on the fuel

system. Fuel may be under high pressure. Fuel sys-

tem work should be performed in a well ventilated

area free of any possible ignition source. It is recom-

mended that you have a fire extinguisher nearby.

Fig 1AP