East Coast Supercharging Lysholm 2010+ Camaro Supercharger Kit - Manual (Page 28)

P/N: 4LGE020-010 v1.1, 2011-04-29
© 2011 Lysholm
All Rights Reserved, Intl. Copr. Secured
18
AH. Intake manifold component removal
1. Carefully remove all eight (8) intake port
seals from the OEM intake manifold. Set
aside for future use. See fig 1AW.
2. Using a Torx T25 to remove the MAP
sensor located at the front of the OEM
intake manifold. Set aside for future use.
See fig 1AX.
3. Remove the brake booster line from the
back port of the OEM intake manifold.
Set aside for future use. See fig 1AY.
Fig 1AW
Fig 1AX
Fig 1AY