East Coast Supercharging ECS Stage 2 2003+ Fuel System User Manual
East Coast Supercharging For the car
ECS Stage II/Stage III Fuel System Instructions
The ECS Stage II and Stage III fuel Systems are designed for late model Corvettes exceeding 750 RWHP.
The System Comes with a custom in tank fitting a Areomotive Fuel Pressure Regulator, a -6 an return
line and an assortment of Anodized fitting to make the entire system work.
You are working with Fuel. Be mindful of any sources of heat, sparks or any other conditions that could
cause a fire. ECS cannot and will not be held responsible for any damages caused by installation.
The stage II and Stage II systems require Removal of the driver side fuel tank for removal of the factory
fuel Pressure regulator.
Start with an empty fuel tank.
Disconnect the negative battery cable.
Remove the driver’s side rear wheel and inner fender liner.
Remove both mufflers and exhaust midsection
Disconnect the fuel fill hose and recirculation line from gas door