East Coast Supercharging Lysholm 2010+ Camaro Supercharger Kit User Manual

Page 39

P/N: 4LGE020-010 v1.1, 2011-04-29

H. Using the supplied ¼-20x.5 screws with

washers, attach the relocation heat shield to

the coil bracket assembly as shown using the

¼-20 nylock nuts on the bottom side. See fig

3M.

I. Install the relocation bracket assembly to the

driver side valve cover using a supplied

M6x1.0x20mm screw and two (2) factory

screws. See fig 3N, 3O.

Fig 3N

Fig 3O

Fig3M

NOTE: Slight adjustment of the factory A/C line may be

required for adequate clearance around the spark

plug wires.