D-Link DES-3018 - Manual (Page 57)

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
44
MAC Notification Settings
Figure 6- 17. MAC Notification Settings
MAC Notification is used to monitor MAC
addresses learned and entered into the
forwarding database. To globally set MAC
notification on the Switch, open the
following window by clicking
Administration > MAC Notification
Settings.
Global Settings
The following parameters may be viewed
and modified:
Parameter Description
State Enable or disable MAC notification
globally on the Switch
Interval
(sec) The time in seconds between
notifications.
History
Size The maximum number of entries
listed in the history log used for
notification. Up to 500 entries can
be specified.
Port Settings
To change MAC notification settings for a
port or group of ports on the Switch,
configure the following parameters.
Parameter Description
From…To Select a port or group of ports to
enable for MAC notification using
the pull-down menus.
State Enable MAC Notification for the
ports selected using the pull-
down menu.
Click Apply to implement changes made.