beautypg.com

Igmp snooping group – D-Link DES-3018 User Manual

Page 197

background image

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual

184

IGMP Snooping Group

This window allows the Switch’s IGMP Snooping Group Table to be viewed. IGMP Snooping allows the
Switch to read the Multicast Group IP address and the corresponding MAC address from IGMP packets that
pass through the Switch. The number of IGMP reports that were snooped is displayed in the Reports field.
To view the IGMP Snooping Group Table, click Monitoring > IGMP Snooping Group

Figure 11- 19. IGMP Snooping Group Table

The user may search the IGMP Snooping Group Table by VID by entering it in the top left hand corner
and clicking Search.
The following field can be viewed:

Parameter Description

VLAN ID

The VLAN ID of the multicast group.

Multicast Group

The IP address of the multicast group.

MAC Address

The MAC address of the multicast group.

Reports

The total number of reports received for this group.

Port Map

These are the ports where the IGMP packets were snooped are displayed.

NOTE: To configure IGMP snooping for the Switch, go to the L2 Features
folder and select IGMP Snooping. Configuration and other information
concerning IGMP snooping may be found in Section 7 of this manual
under IGMP Snooping.