D-Link DES-3018 - Manual (Page 47)

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
34
Port Error Disabled
The following window is used to view information about ports that have had their connection status
disabled, due to the detection of some storm control anomaly. To view the following window, click
Administration > Port Configuration > Port Error Disabled
Figure 6- 5. Port Error Disabled window
The following information can be viewed in the preceding window:
Parameter Description
Port Denotes the port on the Switch that has been disabled.
State Describes the current running state of the port in question, whether enabled or disabled.
Connection Describes the current running state of the port in question. This field will read err-disabled
when a port has been disabled due to connection errors.
Reason Describes the reason for the error of the current running state of the port, which is exceeding
the Packet Storm Control threshold.
Description Displays the pre-configured description of the port, configured by the user.