D-Link DES-3018 - Manual (Page 161)

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
148
state following a failed authentication exchange with the client. The default setting is
60 seconds.
SuppTimeout This value determines timeout conditions in the exchanges between the Authenticator
and the client. The default setting is 30 seconds.
ServerTimeout This value determines timeout conditions in the exchanges between the Authenticator
and the authentication server. The default setting is 30 seconds.
MaxReq The maximum number of times that the Switch will retransmit an EAP Request to the
client before it times out of the authentication sessions. The default setting is 2.
ReAuthPeriod A constant that defines a nonzero number of seconds between periodic re-
authentication of the client. The default setting is 3600 seconds.
ReAuth Determines whether regular re-authentication will take place on this port. The default
setting is Disabled.
Forward EAPOL PDU
Both This function allows the user to Enable or Disable the EAPOL PDU received by the
port.
Click Apply to implement your configuration changes. To view configurations for the 802.1X
Authenticator Settings on a port-by-port basis, click the link
Show Authenticators Setting .