D-Link DES-3018 - Manual (Page 54)

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
41
SNTP Settings
Time Settings
This window is used to configure the time settings for the Switch. To view this window click,
Administration > SNTP Settings > Time Settings.
Figure 6- 15. Current Time Settings window
The following parameters can be set or are displayed:
Parameter Description
Time Settings - Current Time
Current Time Displays the current time.
Time Source Displays the source of the time settings viewed here.
SNTP Settings
SNTP State Use this pull-down menu to Enable or Disable SNTP.
SNTP Primary Server The IP address of the primary server the SNTP information will be taken from.
SNTP Secondary
Server The IP address of the secondary server the SNTP information will be taken from.
SNTP Poll Interval in
Seconds The interval, in seconds, between requests for updated SNTP information.
Time Settings - Set Current Time
Year Enter the current year, if you want to update the system clock.
Month Enter the current month, if you would like to update the system clock.
Day Enter the current day, if you would like to update the system clock.