Aiwa XR-H330MD - Manual (Page 9)

— Numbered
■ItT - buttons
o.
-BAND
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in a preset station directly.
1 Press TUNER BAND button to select a band, and
press ◄◄ or ►►► to select a station.
2 Press II to store the station.
A station is assigned a preset number for each band in
consecutive order beginning from 1.
Presef number
PRESET STATION TUNING
1 Press TUNER BAND to select a band.
2 Press ◄►or turn MULTI JOG.
Each time the button is pressed, the next ascending preset
number is selected.
Tuning by preset number
1 Press BAND on the remote control while pressing SHIFT to
select a band. (Or, use TUNER BAND on the main unit.)
2 Press the numbered buttons on the remote control to select a
preset number:
Example:
To select preset number 10, press the +10 and 0 buttons.
To select preset number 15, press the +10 and 5 buttons.
To clear a preset station
Select the preset number of the station to be cleared. Then,
pressB, and press
II within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
NOTE
If there is a long period of power failure or disconnecfion of AC
cord, the presetting of the stations is canceled. In this case, preset
again.
Q
2
3
o
o
u
K
a
<
DC
p-p-i
Frequency
F^epeat steps 1 and 2.
The next station will not be stored if a tofal of 32 preset stations
have already been stored.
If you try prestting more than 32 stations, ”PRST FULL" is
displayed.
ENGLISH
9