Aiwa XR-H330MD - Manual (Page 10)

TAPE PLAYBACK
To select a reverse mode (deck 2 only)
Deck 2
• On deck 1, tapes are always played back on both sides.
• On deck 2, you can select a reverse mode to play back one or
both sides.
1 Press TAPE and press ± EJECT to open the
cassette holder.
A EJECT
Insert a tape with the exposed side down. Push the cassette
holder to close.
2 Press ◄►to start play.
Playback side indicator
Press MODE repeatedly until "Deck 2 MODE?" is displayed.
Within 10 seconds, press ENTER, then turn MULTI JOG to
select the reverse mode.
REJj M Z >
[iiZ: □
To play one side only, select "1".
To play from front side to reverse side once only, select "Z)".
To play both sides repeatedly, select "Cl)".
3 Within 10 seconds, press ENTER again.
When tapes are loaded in both decks
Press TAPE DECK 1/2 first to select a deck.
The selected deck number is displayed.
To stop play, press ■.
To pause play (deck 2 only), press II. To resume play, press
again.
To fast forward or rewind, press ◄◄ or ►►. Then press ■
to stop the tape.
To start piay when the power is off (Direct Play Function)
When the tape is loaded, press TAPE DECK 1/2. The power is
turned on and play of the inserted tape begins.
To set the tape counter to 0000
Press ■ in stop mode.
The counter is also set to 0000 when the cassette holder is
opened.
T'FZi. '6600
Playing deck number Tape counter
► : The front side is being played (forward).
◄ : The back side is being played (reverse).
Types of tape
This unit was designed for optimal playback of Type I (normal)
tapes.
Type II tapes can also be played back in this unit. When playing
back a Type II tape, turn MULTI JOG to display "SOFT" in the
display window. This will set the optimum playback sound for
Type II tapes. However, "SOFT" playback will be canceled if the
graphic equalizer is selected (page 7), the unit is switched to a
different audio source, the cassette holder is opened, or when
the power is turned off.
1 0
ENGLISH