beautypg.com

Video/aux jacks, When connecting a turntable, Digital in (optical) jack – Aiwa XR-H330MD User Manual

Page 35: When digital in (optical) jack is not being used, Surround speakers jacks, Cd digital out (optical) jack

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

OTHER CONNECTIONS

■ CD DIGITAL

OUT

(OPTICAL)

■ VIDEO/AUX

SURROUND
SPEAKERS

Refer to the operating instructions of the connected equipment

for details.
• The connecting cords are not supplied. Obtain the necessary

connecting cords.

• Consult your local Aiwa dealer for optional equipment.

VIDEO/AUX JACKS

This unit can input analog sound signals through these jacks.

Use a cable with RCA phono plugs to connect audio equipment

(turntables, LD players, MD players, VCRs, TV, etc.).

Connect the red plug to the R jack, and the white plug to the L

jack.

When connecting a turntable

Use an Aiwa turntable equipped with a built-in equalizer amplifier.

DIGITAL IN (OPTICAL) JACK

This unit can input digital sound signals through this jack.
This unit has a built-in sampling frequency rate converter, which
converts the sampling frequency rates that are different from the

MD sampling frequency rate (BS/CS tuner or DAT (32 kHz or 48

kHz), and other digital signals) into a sampling frequency rate

that can be recorded on an MD (44.1 kHz).

Use an optical cable to connect digital audio source equipment

(DAT deck, MD player, etc.).

Remove the dust cap .a) from DIGITALIN (OPTICAL) jack. Then,

connect an optical cable plug to DIGITAL IN (OPTICAL) jack.

(0

L

{0

s;

o

“ E

Ui <

XS!

Oo

u,

z

(A

Z

o

lU I-

XU

put
OX

o
o

When DIGITAL IN (OPTICAL) jack is not being used

Attach the supplied dust cap.

SURROUND SPEAKERS JACKS

Connect optional surround speakers with 8 to 16 ohms
impedance to the jacks.

CD DIGITAL OUT (OPTICAL) JACK

This unit can output CD digital sound signals through this jack.

Use an optical cable to connect digital audio equipment (digital

amplifier, DAT deck, MD recorder, etc.).

Remove the dust cap @ from CD DIGITAL OUT (OPTICAL) jack.

Then, connect an optical cable plug to CD DIGITAL OUT
(OPTICAL) jack.

When CD DIGITAL OUT (OPTICAL) jack is not being used
Attach the supplied dust cap.

Because this unit complies with the SCMS standard (page 26),
digital MD recordings made with this unit cannot be recorded
again via digital input to other digital devices.

Digital dubbing of MD recordings made with this unit from an

external satellite/cable receiver, however, may be possible

depending on the type of the tuner being used.

ENGLISH

35