Check your accessories, Before connecting the ac cord, Iwiportant – Aiwa XR-H330MD User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PREPARATIONS
Check your accessories
ips,
°c '
Of j
vj;
Remote control AM loop antenna
Operating instructions, etc.
FM antenna
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage matches your local voltage.
iWIPORTANT
• Connect the speakers, antennas, and all optional equipment
first. Then connect the AC cord in the end.
• There are no differences between the front speakers. Both
speakers can be connected as L (Left) or R (Right).
1
Connect the right and left speakers to the main
unit.
(i) Connect the right speaker cord with twisted cables to
SPEAKERS LOW FREQRterminals, and left to SPEAKERS
LOW FREQ L terminals.
The speaker cord with the white stripe should be connected
to O terminal and the black cord to © terminal.
@ Connect the right speaker cord with RCA pin plug to
SPEAKERS HIGH FREQ R terminal, and left to SPEAKERS
HIGH FREQ L terminals.
4
ENGLISH