Potter PFC-6030 - Manual (Page 82)

5-76
PFC-6030 • 5403595 • Rev C • 2/13
NAC Functions
The two (2) on-board circuits (NACs 1&2) are automatically configured as “General Purpose”, but may be reconfigured and
renamed. Refer to the table below for descriptions of the configuration functions.
NAC Circuit Configuration Functions Table 18:
Function Description
Unused Circuit is unused.
General Purpose General purpose NAC; obeys zone “output pattern” programming.
Potter Sync Drives Potter synchronized horns / strobes.
Gentex Sync Drives Gentex synchronized horns / strobes.
System Sensor Sync Drives System Sensor synchronized horns / strobes.
Wheelock Sync Drives Wheelock synchronized horns / strobes.
Aux Constant Constant DC power.
Aux Resettable Constant DC power; disconnects power during system reset.
Aux Door Holder Constant DC power; disconnects when an alarm occurs.
Aux Door Holder Low AC Drop Constant DC power; disconnects on AC Loss or when an alarm occurs.
Aux ANSI Always on ANSI pattern used for ASB pattern synchronization.
City Tie Municipal box connection