Potter PFC-6030 - Manual (Page 115)

A-2
PFC-6030 • 5403595 • Rev C • 2/13
Operating Instructions Table 24:
Operation Task
Set Date / Time
Press •y ENTER – Main Menu.
Press •y 3 – Set Date / Time.
Use keypad to enter correct date; use •y right arrow to move through
date field and to display time field.
Press •y ENTER to save changes.
enable / Disable Point
Press •y ENTER – Main Menu.
Press •y 2 – Enable/Disable; enter panel’s code.
Press •y 1 – By Point
Up / Down •y to select Device / Internal SLC / PWR, and press ENTER.
Enter •y Addr / Ckt No. and press ENTER.
Press •y Up / Down to scroll.
Point’s current status displays “ •y Normal” if enabled, or “Disabled”.
Press •y ENTER to change status; press ENTER to save or ESC to exit
without saving.
view event History
Press •y ENTER – Main Menu.
Press •y 1 – View History.
Press •y Left / Right to view next / previous events.
Press •y ESC to exit.
Service Call: