Potter PFC-6030 User Manual
Page 109
6-103
PFC-6030 • 5403595 • Rev C • 2/13
Power Supply
default name.
Click here to select
Class "A" for the
repeated P-Link circuit.
PSN-1000/PSN-1000(E) Programming
The panel can be programmed to support up to thirty-one (31) PSN-1000/PSN-1000(e) Power expanders. each power supply
provides six (6) NAC circuits (3A max), and two (2) dry contact input circuits. Both Class A and B configurations are supported;
however, Class A requires that NAC circuits are paired as follows: NAC 1&2, NAC 3&4 and NAC 5&6, thus providing three (3)
Class A circuits.
Adding a Power Supply
To add and configure a power supply:
Select the
1.
Power Supply function from the system panel. The "Add Device" window displays.
Example of Add Power Supply Window
Figure 144.
Click the
2.
Add Device button to create a new power supply.
Example of Add Power Supply Window
Figure 145.
Configure the power supply, as needed:
3.
Double-click in the
y
“Name” field to change the default name.
Double-click in the
y
“Address” field to enter a different address.
Click on the
y
"Class" drop-down arrow to select Class A for the repeated P-Link circuit.
Example of Power Supply "Class for P-Link" Operation
Figure 146.