Potter PFC-6030 - Manual (Page 45)

4-39
PFC-6030 • 5403595 • Rev C • 2/13
The table below provides a brief summary of the pushbuttons:
Control Panel Pushbuttons Table 7:
Pushbutton Description
Press to acknowledge the currently displayed condition .
Press to silence all outputs programmed as silenceable and buzzer.
Press to reset panel to normal condition.
Press to begin a fire drill.
Status LEDs
The control panel’s LeDs communicate system conditions by illuminating and/or flashing the applicable green, red or amber
indicators. These are described in the table below.
Control Panel Status LEDs Figure 57.
Status LEDs Table 8:
LED Type LED Color/Action Description
Power Steady Green
Power is present.
Note: If power is absent for more than 5 seconds, LeD will extinguish.
Alarm Flashing Red An alarm device is active.
earth Fault Flashing Amber A ground fault is present.
Supervisory Flashing Amber A supervisory condition is present.
Silenced Steady Amber A fault condition has been silenced.
Trouble Flashing Amber A fault condition is present.