Interlogix NS2503-24P/2C User Manual - Manual (Page 90)

NS2503-24P/2C User Manual
90
Static MAC Table
You can add a static MAC address that remains in the switch's address table regardless of whether the device is physically
connected to the switch. This saves the switch from having to re-learn a device's MAC address when the disconnected or
powered-off device is active on the network again. Via this interface, you can add / modify / delete a static MAC address.
 Add the Static MAC Address
You can add static MAC address in the switch MAC table here.
Figure 4-6-2: Static MAC Addresses Interface Screenshot
The page includes the following fields:
Object Description
MAC Address:
Enter the MAC address of the port that should permanently forward traffic,
regardless of the device network activity.
Port num.: Pull down the selection menu to select the port number.
VLAN ID: The VLAN ID for the entry.