Interlogix NS2503-24P/2C User Manual - Manual (Page 64)

NS2503-24P/2C User Manual
64
Protect Port
There are two protected port groups; ports in different groups can't communicate.
In the same group, protected ports can't communicate with each other, but can communicate with unprotected ports.
Unprotected ports can communicate with any port, including protected ports.
Figure 4-3-7: Protected Port Setting Web Interface Screenshot
The page includes the following fields:
Object Description
Port ID Identify the Managed Switch interface.
Protected
Enable the Protected function on the selected port.
If the check box is not shown as
, then this port is an unprotected port and it can
communicate with any port - including protected ports
Group 1
Set the protected port to bea Group 1 member.
Group 2
Set the protected port to be a Group 2 member.