Interlogix NS2503-24P/2C User Manual - Manual (Page 12)

NS2503-24P/2C User Manual
12
 Cisco ether-channel (Static Trunk)
 Spanning Tree Protocol
- STP, IEEE 802.1D (Classic Spanning Tree Protocol)
- MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)
 Port Mirroring to monitor the incoming or outgoing traffic on a particular port
 Quality of Service
 4 priority queues on all switch ports
 Traffic classification:
- IEEE 802.1p CoS
- IP TOS / DSCP to 802.1p priority mapping
- Port-Based priority
 Strict priority and Weighted Round Robin (WRR) CoS policies
 Supports QoS and In/Out bandwidth control on each port
 In/Out rate limit control on each port
 Multicast
 Supports IGMP Snooping v1 and v2
 IGMP Snooping v2 fast leave
 Querier mode support
 Security
 IEEE 802.1x Port-Based network access control protocol
 RADIUS users access authentication
 L3 / L4 Access Control List (ACL)
 Source IP-MAC / Port-Binding
 Port Security for Source MAC address entries filtering
 Management
 Switch Management Interface
- Telnet Command Line Interface
- Web switch management
- SNMP v1, v2c, v3 switch management
- SSL switch management
 Three user privilege levels control (Admin, Operator, viewer)
 DHCP client for IP address assignment
 DHCP Option82 and DHCP Relay
 Link Layer Discovery Protocol (LLDP) for easy network management
 Built-in Trivial File Transfer Protocol (TFTP) client
 Firmware upgrade via TFTP or HTTP
 Configuration restore / backup via TFTP or HTTP
 Event message logging to remote Syslog server
 Alarm records extractable in standard CSV format for post processing
 Four RMON groups 1, 2, 3, 9 (history, statistics, alarms, and events)
 SNMP trap / E-Mail Alarm for interface Link Up and Link Down notification
 Supports Ping function
 Supports Simple Network Protocol (SNTP)