Trap managers, Igmp – Interlogix NS2503-24P/2C User Manual User Manual
Page 173

NS2503-24P/2C User Manual
173
Parameters:
<community-str> specifies the community string.
e.g. snmp community read-all-only public
no snmp community
Description:
Delete SNMP community string.
Syntax:
no snmp community
<community-str>
Parameters:
<community-str> specifies the community string.
e.g. no snmp community public
show snmp community
Description:
Show SNMP community strings.
Trap Managers
snmp trap
Description:
Set SNMP trap receiver IP address, community string, and port number.
Syntax:
snmp trap
<ip-addr> [<community-str>] [<1..65535>]
Parameters:
<ip-addr> specifies the IP address.
<community-str> specifies the community string.
<1..65535> specifies the trap receiver port number.
e.g. snmp trap 192.168.200.1 public
no snmp trap
Description:
Remove trap receiver IP address and port number.
Syntax:
no snmp trap
<ip-addr> [<1..65535>]
Parameters:
<ip-addr> specifies the IP address.
<1..65535> specifies the trap receiver port number.
e.g. no snmp trap 192.168.200.1
show snmp trap
Description:
Show all trap receivers.
IGMP
The Internet Group Management Protocol (IGMP) is an internal protocol of the Internet Protocol (IP) suite.
igmp
Description:
Enable/disable IGMP snooping.
Syntax:
[no] igmp