Interlogix NS2503-24P/2C User Manual - Manual (Page 117)

NS2503-24P/2C User Manual
117
 Non-IPv4 ACL
In ※Packet Type / Binding box Non-IPv4 should be selected.
Object Description Default Vaule
Group ID 1 ~ 200
Action Permit / Deny.
 Permit: Permit packet cross switch.
 Deny: Drop packet.
Permit
VLAN Any / VID.
 Any: Any VLAN ID.
 VID: 1~4094. A certain VLAN ID.
Any
Packet Type IPv4 / Non-IPv4 / Binding
 IPv4: Set Ipv4 packet field.
 Non-IPv4: Set non-Ipv4 packet field.
 Binding: Set binding entry.
IPv4
Ether Type
Set this field if Packet Type is Non-IPv4, else ignore.)
Any / ARP(0x0806) / IPX(0x8137) Any
Type Set this field if Packet Type is Non-IPv4, else ignore.)
0~0xFFFF
If ether type not find in Ether Type field, you can direct assign
number.
Current List Creates ACL and Binding groups.

Binding
Lets the device have specific IP address and MAC address use the network. We can set specific IP address, MAC address,
VLAN id and port id to bind, and device can cross switch if all conditions match.
Use binding function; we should enable it first in following page.
In Packet Type / Binding box the binding box should be selected.
Object Description Default Vaule
Group ID 1 ~ 200
Action Permit / Deny.
 Permit: Permit packet cross switch.
 Deny: Drop packet.
Permit
VLAN Any / VID.
 Any: Any Vlan id.
 VID: 1~4094. A certain vlan id.
Any
Packet Type IPv4 / Non-IPv4 / Binding
 IPv4: Set Ipv4 packet field.
 Non-IPv4: Set non-Ipv4 packet field.
 Binding: Set binding entry.
IPv4
MAC Address **:**:**:**:**:**
* is represent a digit from 0~9 and A~F,
*** is range from 0 to FF. 00:11:22:33:44:55
IP Address ***.***.***.***
* is represent a digit from 0~9,
*** is range from 0 to 255. 0.0.0.0
Port Id Source port id, from 1~10. 1
Current List Creates ACL and Binding groups.