Interlogix NS2503-24P/2C User Manual - Manual (Page 86)

NS2503-24P/2C User Manual
86
Figure 4-5-4: Aggregation Information of Switch 1 Screenshot
5. Click on the tab of Aggregator Information to check the trunked group information as the illustration shown above
after the two switches configured.

Switch 2 configuration
1. Set System Priority of the trunk group. For example: 1.
2, Select a trunk group ID by pull down the drop-down menu bar.
3. Enable LACP.
4. Include the member ports by clicking the Add button after selecting the port number and the column field of Work Ports
changes automatically.