Interlogix NS2503-24P/2C User Manual - Manual (Page 180)

NS2503-24P/2C User Manual
180
Power over Ethernet Commands
show poe Show System Power over Ethernet information
show poe status Show PoE port information
poe temperature-protection Enabling or disabling the PoE power supply over temperature protection
poe limit-mode Configure System PoE power limit mode information
poe enable Enabling or disabling the port POE injects function
poe priority Set port priority for the power supply management
poe maximum-power
*
Enabling or disabling per port power output limit
WGSW-2620HP PoE power budget is 360W and support 24 ports PoE. This chapter will be
described how to configure PoE feature by example ofNS2503-24P/2C.
Display System PoE status
show poe
Description:
Show System Power over Ethernet information
Command Level
Global Configuration
Example:
Switch(config)# show poe
Maximum Available Power
POE Admin mode
Temperature Unit1
Temperature Unit2
Over Temperature
PoE Power Consumption
Temperature Threshold
Usage
Usage Threshold
PoE Power limit mode :360Watts
:Enable
:34C/93F
:37C/98F
:Enable
: 0 Watts
:50
:0%
: 100%
: Consumption