Interlogix NS2503-24P/2C User Manual - Manual (Page 144)

NS2503-24P/2C User Manual
144
Configure IP address
The Managed Switch is shipped with the following default IP address.
IP Address : 192.168.0.100
Subnet Mask : 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please use the following procedures:
 Show the current IP address
1. On ”Switch# ” prompt, enter “configure”.
2. On ”Switch(config)# ” prompt, enter “show ip”.
3. The screen displays the current IP address, Subnet Mask and Gateway. As show in Figure 5-2-1 .
Figure 5-2-1: Show IP information Screenshot