Interlogix NS2503-24P/2C User Manual - Manual (Page 170)

NS2503-24P/2C User Manual
170
spanning-tree mst <0-15> vlan []
Description:
Set MSTI to map VLAN list.
Syntax:
spanning-tree mst <0-15> vlan []
Parameters:
<0-15> specifies the MSTI instance ID.
specifies the mapped VLAN list. Null means all VLANs.
spanning-tree mst <0-15> port path-cost <1-200000000> []
Description:
Set spanning tree port path cost of MSTI.
Syntax:
spanning-tree mst <0-15> port path-cost <1-200000000> []
Parameters:
<1-200000000> specifies port path cost.
specifies the ports to be set. Null means all ports.
spanning-tree mst <0-15> port priority <0-240> []
Description:
Set spanning tree port priority of MSTI.
Syntax:
spanning-tree mst <0-15> port priority <0-240> []
Parameters:
<0-240> specifies the port priority. The value must be in steps of 16.
specifies the ports to be set. Null means all ports.
no spanning-tree mst
Description:
Delete the specific MSTI.
Syntax:
no spanning-tree mst <0-15>
Parameters:
<0-15> specifies the MSTI instance ID.
show spanning-tree
Description:
Show spanning-tree information of CIST.
show spanning-tree port
Description:
Show spanning tree port information of CIST.
Syntax:
show spanning-tree port [<port-list>]
Parameters:
<port-list> specifies the port to be shown. Null means all ports.
show spanning-tree mst configuration
Description:
Show MST instance map.
Syntax:
show spanning-tree mst configuration