Interlogix NS2503-24P/2C User Manual - Manual (Page 131)

NS2503-24P/2C User Manual
131
The table includes the following fields:
Object Description
First Come First Service The sequence of packets sent is based on arrival order.
All High before Low The high priority packets sent before low priority packets.
Weighted Round Robin
Select the preference given to packets in the switch's higher-priority queue.
These options represent the number of higher priority packets sent before one
lower priority packet is sent.
For example, 8 Highest : 4 SecHigh : 2 SecLow : 1 Lowest means that the switch
sends 8 highest priority packets before sending 4 second high priority packet,
before sending 2 second low priority packet, before sending 1 lowest priority
packet.
802.1p priority [0-7] Set up the COS priority level 0~7—High, Middle, Low, Lowest.
Apply: Press this button for changes to take affect.
Default: Press this button to reset QoS setting to default mode.
Help: Provide help information of QoS Configuration.
802.1p Priority: Priority classifiers of the Switch forward packet. COS range is from 0 to 7.
Seven is the highest class, and zero is the lowest class. The user may configure the
mapping between COS and Traffic classifiers.